CategoriesIntroduction to Jammers Jammer knowledge News

When installing a signal jammer in an inspection room, the first step is to find a suitable installation location

5G signal jammer

When installing a best signal jammer in an examination room, the first step is to find a suitable installation location. The best location is near the cell phone signal area. In a crowded area, cell phones will be highly concentrated and can play an important role in ensuring the proper functioning of the signal jammer. However, if the shield is installed in this place, it will interfere with other electronic devices in the vicinity, which will affect people’s normal use of cell phones as well as their work. Therefore, we must make sure that only one area has strong signal strength by testing.

First, you need to choose an inconspicuous place that is not easily noticed by others. Typically, it should not be in front of a door or window, and it must be hidden behind objects or furniture so that it is not too noticeable when in use. Secondly, do not choose places where people often go during exams or some other activities, such as: parents’ rooms; toilet areas, etc., because these places can easily be found by students or teachers who are warned by radar wave interference signals in order to find out whether there are signal jammers nearby.

Where is the best place?

It is important to note that when installing a 5G jammer, it would be better to find a place where there is no signal interference or a weak signal than to install it in a crowded place. Because after all, this thing needs to block signals from different directions while jamming them, so if there are no people around, then your performance will not be affected by other signals.

In a crowded place, where cell phones will be highly concentrated, they can also play an important role in making sure that the signal jammer works properly.

When installing a signal jammer in an exam room, the first step is to find a suitable installation location. This can be achieved by considering the following three points.

it may interfere with other electronic devices in the classroom such as computers and printers. So it should not be placed too close to the exam room (within 30 meters). If you want to minimize interference, then you need to install the equipment upstairs or on a balcony outside the classroom, or about 50 meters away from the classroom.

High altitude areas. Since most cell phones are generally held close to each other when people talk on them and use headphones when listening to music through them while walking around campus, they are usually at a lower elevation so that they can easily receive signals from nearby base stations without being blocked by nearby walls or buildings; therefore installing GPS signal jammers at high elevations will ensure that they can cover a larger area of the entire campus and reduce problems caused by tall buildings blocking the signal between the base stations and the phones located in those buildings themselves (this means less wasted investment, as purchasing additional equipment such as boosters/repeaters will not be effective). However, keep in mind that if your equipment covers too large an area, then some students may have difficulty receiving a signal anywhere other than inside the classroom, which defeats its purpose entirely.

The installation of a signal jammer should not be overlooked. It is a very important step. If there are no special requirements for the location, it can be placed in a place where cell phones are concentrated, which can play an important role in ensuring that the signal jammer works properly.